Home > 1:35 Scale Moulds > 1:35 Scale Moulds for Roads, Paving and Floors.

1:35 Scale Storm Drain Grates Mould (1350062)

The 1:35 Scale Storm Drain Grates Mould produces two different drain grates and their frames.

This mould was primarily designed to be used with resin but could be used with hard casting plasters if you let the plaster harden completely before removing from the mould.

The white storm drain grates and frames in the product images were cast using our 9000psi hard casting plaster.

The dark storm drain grates and frames in the product images were made using Multi-Purpose Polyester Resin mixed with Fine Iron Powder (1 part resin to about 4 parts Fine Iron Powder (by weight)). This resin iron mixture cannot be poured and must be applied to the mould in layers with a small brush. When cured the castings can be made to rust and buffed to look like real iron. The grates and frames in the pictures have not been painted.

This mould will give you a virtually unlimited supply of 1:35 scale Storm Drain Grates and frames when used with plaster; resins will reduce the life of the mould.

These moulds are made of the high quality platinum-cure silicone giving the mould an exceptionally long library life and high resistance to aggressive resins.

Specifications:
Number of drain grates and frames per casting and approximate size:

1 Square Storm Drain Grate
1 Square Storm Drain Frame
1 Rectangular Storm Drain Grate
1 Rectangular Storm Drain Frame
Approximate overall size of Square Storm Drain 10.7mm x 10.7mm x 3mm
Approximate overall size of Rectangular Storm Drain 14.7mm x 11.7mm x 3mm

We recommend:

Resin or a good quality hard castings plaster. Some cheaper forms of Plaster of Paris may break when removing the castings from the mould.

SKU: 1350062